No smart lighting solution is as elegant as having smart light switches and dimmers embedded in your walls. Sure, you could screw smart bulbs into your fixtures, or plug a couple of lamps into smart plugs and call it a day, but if the light fixture in question is controlled by a dumb switch, you’ll never be able to control that smart bulb if the switch is in the off position.
While they can be a pain to install—hire an electrician if you not comfortable doing it yourself—once it’s installed, a smart light switch lets you turn your lights on and off according to a schedule, with a smartphone app, and—with the installation of accessories—in response to voice commands, motion, or even your location (provided you have your smartphone with you).
Updated on July 29, 2021 with our review of the second-gen Philips Hue Dimmer Switch from Signify. Not only does the new Dimmer Switch look more contemporary than its predecessor, it also adds a new Hue button and a time-based light scene mode, along with a larger wall plate that allows for both peel-and-stick as well as screw mounting.
Where a smart switch simply turns a connected light bulb or fixture on and off, a smart dimmer can also adjust the brightness of the bulbs in the fixtures it controls. Since a dimmer is essentially a switch with an added function, we’ll use the terms interchangeably here, but our reviews focus primarily on dimmers. We’ll discuss the difference in more detail in the buyers’ guide on the next page.
The prices of smart switches and dimmers have come down a lot in the past year or two, although the fanciest and most powerful examples remain expensive. You’ll encounter products from familiar names such as Leviton and Lutron, as well as a host of newcomers to this space, including Noon and Hogar. In most cases, replacing a dumb switch with a smart one is a relatively simple DIY project; but again, there’s no shame in hiring an electrician to do the job.
Here are our top picks in smart dimmers, followed by a guide to the features and terminology you’ll encounter when you shop for one. You can also go straight to a list of our most recent smart-switch reviews.
Best smart dimmer overall
Lutron’s Caséta ecosystem is much less open than the other big three smart lighting platforms: Wi-Fi, Z-Wave, and Zigbee. Lutron is the only source of dimmers and switches, but the company is great about supporting other classes of third-party products within the Caséta ecosystem. In addition to its own line of motorized smart shades, ceiling fan controllers, plug-in devices, occupancy sensors, and remote controls, you can also create time- and location-based smart home “scenes” incorporating any Caséta or Serena product along with Sonos speakers, several brands of smart thermostats, and Hunter ceiling fans. The Caséta Smart Bridge is Apple HomeKit compatible, too, and it can be integrated with a Samsung SmartThings hub.
The dimmer switches in the Lutron Caséta Smart Lighting Dimmer Switch Kit are elegantly designed with four plate-style buttons: On at the top, off at the bottom, and triangular brighten and dim buttons in the middle. A stack of LEDs on the left-hand side indicates the brightness level. The kit also comes with Lutron’s Pico wireless remote controls, for those situations where you don’t want to bark at a smart speaker to dim the lights. The Caséta dimmer is also ideal for installations where there is no neutral wire in the box—it’s one of the few smart switches that doesn’t require one.
Best Wi-Fi smart dimmer
GE doesn’t build the prettiest dimmer on the market, but its C-Start Smart Switch Motion Sensing+Dimmer switch sure packs the features. And if you happen to own C by GE smart bulbs, the switch can also control them even if they’re not wired to the dimmer. Being a Wi-Fi device, this dimmer switch doesn’t require the presence of a smart home hub or any other bridge to your home network. An onboard motion sensor can turn the light switch on when the room is occupied, and an ambient light sensor will stop that from happening if there’s enough daylight that the extra light isn’t needed. There’s also night light in the form of a ring around the on/off button, but that can be turned off in the app if you find that adds to your indoor light pollution. There’s now also a 3-wire version of this product that doesn’t require a neutral wire
Best Zigbee smart dimmer
If you’ve settled on Zigbee as your smart lighting protocol of choice—and it’s certainly not a bad one, considering the only other thing you’ll need is an Amazon Echo Plus smart speaker—allow us to recommend Jasco’s Enbrighten Zigbee In-Wall Smart Dimmer. This in-wall dimmer not only has a slimline design that isn’t tough to shove back into the box when you install it, it has enough onboard intelligence to distinguish the line wire from the load wire, so you don’t need to worry about mixing them up if you’re doing the work for yourself. This smart dimmer is affordably priced, too.
Best Z-Wave smart dimmer
Putting this roundup together exposed a hole in our editorial coverage. I’ve had Leviton’s Decora Smart Z-Wave switches and dimmers (along with other brands of Z-Wave switches) installed in my own smart home for many years (we built the house in 2007), but we’ve never officially reviewed them. That said, Leviton’s Z-Wave lighting controls are among my favorites; so, while TechHive hasn’t officially reviewed Leviton’s product, I have deep personal experience with it and recommend it strongly.
Most sophisticated smart dimmer
Unfortunately, our current favorite smart lighting system of all time is not only very expensive, it’s also now available only through professional installers after the company was acquired by Racepoint Energy. But if you can afford it, this is the most sophisticated—and the most beautiful—in-wall lighting on the market. The system consists of a Room Director dimmer with a color OLED touchscreen display that replaces a primary switch in a room, and up to 10 slightly more ordinary-looking (they don’t have displays) Extension switches. You can build multiple lighting scenes with this system that can turn on every light in the room at a preset brightness level based on the mood you wish to set. Read our in-depth review to learn more about this ultra-sophisticated home lighting solution.
Brilliant predated Noon in integrating a touch panel with a smart switch, and this smart dimmer has some very cool tricks up its sleeve, ranging from being able to stream video from a doorbell camera to controlling a Sonos multi-room audio system. Unlike Noon, a DIYer can buy Brilliant’s products direct, though we experienced a few installation headaches during our review (which, to be fair to Brilliant, involved pre-release hardware).
Best multi-function smart dimmer
Just how many features can you cram in a single-gang light switch? Leviton squeezes a Wi-Fi radio, a dimmer switch, and an entire Amazon Alexa-compatible smart speaker into its Decora Smart Voice Wi-Fi Dimmer with Alexa. Yes, Ecobee pulled off a similar trick earlier, but with an on/off switch, not a dimmer. Leviton also has deeper catalog of other Wi-Fi components—switches, dimmers, ceiling fan controllers, multi-button controllers, and more—to go with it.
Best budget-priced smart dimmer
Best known for building inexpensive routers, TP-Link has steadily increased its footprint in the smart home space with its Kasa Smart product line. Its model HS-220 in-wall smart dimmer connects directly to your Wi-Fi network, so you don’t need a hub, and it’s currently street priced less than $20. One of the biggest downsides? You can’t use it in a three-way configuration.
On the next page, we’ll provide you with helpful tips to keep in mind when you shop for smart lighting controls. Or can you click here to see our latest smart dimmer reviews.
Smart dimmer shopping tips
You’ll need to make a raft of decisions before you choose which smart switches to install in your home, and your choices will be influenced by everything from the type of wiring in your walls to what flavor of smart home system you have now or plan to install later. Here’s what you need to know in roughly the order you’ll need to decide.
Neutral wire requirement: The vast majority of smart switches and dimmers require the presence of a neutral wire—in addition to line (power from the circuit-breaker panel), load (power to the light to be controlled), and ground wires—in the electrical box inside the wall. Smart switches have radios that must be constantly powered, and the neutral wire is what supplies that juice. While all homes have neutral wires, many older homes don’t have a neutral wire in every box. If you’re not sure if there’s a neutral wire at the location you want to install a smart switch, we have a how-to story here that will help you figure it out. If you don’t have a neutral wire, Lutron’s Caséta smart dimmer is one of the few that does not require one.
Single- or multi-pole: If the light you wish to control is connected to just one switch, then you’ll need to replace it with a single-pole smart switch. If more than one switch controls that load—switches on opposite sides of a room, for example—then you’ll need to replace it with a multi-pole smart switch. This typically means that you’ll also need to buy a companion switch or switches for the other end(s) of the circuit. There are a few exceptions to this rule, so check the documentation accompanying whichever smart switch you decide to buy before you install it.
Control protocol: You’ll undoubtedly want to control your smart lighting with your smartphone or tablet, and most people will also want to turn lights on and off with voice commands spoken to a smart speaker, such as an Amazon Echo or a Google Home. But to do that, the smart switch you buy must have some way of connecting to your home network (which explains why Bluetooth smart switches can’t talk to smart speakers).
Some smart switches connect directly to your Wi-Fi network, while others require a bridge to your router. If you’ve invested in a smart home system—Samsung SmartThings, Hubitat Elevation, Vivint Smart Home, or any other ecosystem—you’ll want to make sure that the smart switch you buy is compatible with it. These are the most common communication protocols you’ll encounter.
Bluetooth This type of smart switch is controlled directly by an app on your smartphone or tablet. Bluetooth smart lighting is simple, because you don’t need a hub or a connection to your home network. That isolation also makes it secure, because you must be within about 30 feet of the switch to pair with it. On the other hand, authorized users also must be within 30 feet of a Bluetooth switch to control it, and you can’t control the switch when you’re away from home (although most Bluetooth switches can be controlled according to a pre-programmed schedule). The other major limitation of Bluetooth switches is that they can’t be controlled by smart speakers or smart home hubs, which generally rely on one of the other wireless protocols described here.
Lutron Clear Connect This is a proprietary wireless protocol used by Lutron Caséta Wireless smart home devices, including switches, dimmers, ceiling fan controllers, occupancy sensors, motorized shades, and battery-powered remote controls. You can also control a limited number of third-party devices with Lutron’s app—ranging from thermostats to Wi-Fi speakers—and incorporate them into smart home “scenes.” Clear Connect operates independently of your Wi-Fi network, but you must hardwire a Lutron Smart Bridge to your router to use it. You can control Lutron Caséta devices via Lutron’s app, with voice commands spoken to smart speakers, and from mobile devices anywhere you have broadband access. Some smart home systems, including Samsung SmartThings, can also incorporate Lutron’s smart home products.
Wi-Fi This is a relatively recent trend in smart switches, probably because Wi-Fi hasn’t always been the best means of blanketing a home with connectivity. Mesh Wi-Fi routers, however, have gone a long way to remedying that problem. The attraction of Wi-Fi smart switches is that they don’t require a hub or a bridge to connect to your router. Once installed, they can be controlled with smart speakers, the manufacturer’s own app, and many smart home systems (check compatibility before you buy).
Z-Wave This is a wireless mesh network technology in which each node on the network is also a repeater that can forward commands on to other Z-Wave devices nearby. It operates in the unlicensed 800- to 900MHz radio spectrum (specifically, 908.42MHz in North America). Its low power requirement means it can be incorporated into battery-operated devices that cannot be plugged directly into an electrical circuit, including door/window sensors, smart locks, water leak detectors, and motion sensors in addition to smart dimmers and switches. You’ll need a smart home hub, such as a Samsung SmartThings, to act as a bridge to your Wi-Fi network. Z-Wave is supported by a raft of smart home product developers, including Leviton, Jasco, Aeotec, and others.
Zigbee This wireless mesh network technology is very similar to Z-Wave, but it operates in the unlicensed 2.4GHz radio spectrum (same as single-band Wi-Fi). Like Z-Wave, Zigbee has a lower power requirement and can be incorporated into both battery and line-powered devices, ranging from sensors to smart switches. And as with Z-Wave, you’ll need a smart home hub or some other kind of bridge to connect Zigbee devices to your home network. This could be something as simple as an Amazon Echo Plus, which has an integrated Zigbee radio, or it could be on the order of a Samsung SmartThings hub, which has both Zigbee and Z-Wave radios onboard.
Signify’s Philips Hue bridge is another solution, but it’s generally limited to supporting Philips Hue smart bulbs and accessories. Zigbee is widely support among smart dimmer manufacturers, including Jasco, Sinopé, and Sengled. Lutron also makes an ingenious Zigbee gadget for Philips Hue smart bulbs—the Lutron Aurora—that attaches to an old-fashioned toggle light switch and not only prevents the switch from being turned off (instantly rendering a Philips Hue smart bulb dumb), but it wirelessly controls all the Hub bulbs connected to that switch—complete with a rotary knob for dimming and brightening those bulbs and turning them on or off.
Switch mechanism: Since most people control smart switches and dimmers with voice commands, they soon discover that they rarely physically interact with the devices in their walls. But you’ll want to consider the type of mechanism the smart switch uses if for no other reason than to ensure its aesthetic matches the rest of your home. These are the most common types you’ll encounter.
- Rocker (aka paddle) This type of switch has a wide plastic panel that rocks back and forth when pressed to turn the controlled load on and off (one side of the switch raises when the other is depressed). These modern-looking switches hug the wall and are very easy to operate. Since a command issued over the air will override whatever physical state the switch is otherwise in, smart rocker switches typically don’t physically flip, so there’s no confusion when you see a lit bulb when the switch is ostensibly in the “off” position. A smart dimmer switch might have a secondary control—a vertical slider or a horizontal rocker—for adjusting brightness
- Toggle A toggle switch operates by moving a lever up and down (flipping the lever up turns the controlled light on, and flipping it down turns it off). These types of switches tend to look more old-fashioned than rocker switches, but you can find smart versions of them if you want something that looks like the other switches you have in your walls. As with smart rocker switches, they generally don’t completely change physical appearance when switched on or off.
- Touch High-end smart switches and dimmers feature touch-sensitive surfaces. Typically made of glass, touch-sensitive smart switches and dimmers are typically backlit by one or more LEDs that can be multiple colors. The touch sensitivity can be as simple as touch to turn the switch on and touch again to turn it off, or they can be as complex as displaying a user interface that supports finger swipes for calling up different lighting scenes or control elements. Needless to say, these types of smart switches and dimmers cost considerably more than simple plastic devices.
Wiring connections: Smart switches and dimmers tend to be larger than their dumb counterparts, so you should consider how the new switch will fit in your existing electrical box. This is particularly important if you’re installing multiple smart switches next to each other in a single box. Remember that there will be at least four wires to deal with—line, load, neutral, and ground—and that there will also be a traveler wire if you’re dealing with a multi-pole circuit. It can be challenging to stuff all those wires and the new switch back into the box. These are the most common types of electrical connections you’ll encounter in smart switches.
- Backstabs These are holes in the back of the switch into which you’ll push (“stab”) the appropriate solid copper wires coming out of the wall.
- Pigtails Some switches have short electrical wires emerging from the back of the switch that you’ll attach to the wires coming out of the wall, using wire nuts to secure them. This is generally the easiest technique, but if the switch is deep, it can be a challenge to pack the extra wires and the wire nuts tightly enough into the box so that the switch mounts flush against the wall. It can be particularly difficult if the box has other devices in it.
- Terminals With this type of switch, you’ll wind the wires coming out of the wall around flat screws on the sides of the switch and then tighten the screws down. This technique presents less of a challenge when it comes to pushing the wires and the switch back into the box, but the wires can be stiff and you’ll need to be careful to ensure the stripped wire doesn’t come into contact with stripped wires connected to adjacent switches in the box.